$23.79 - $29.99
Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Freedom is a versatile lightweight rack that makes loading and unloading bikes quick and easy. Foldable upright arms securely clamp top or seat tubes with soft, non-marring pads. - Ratcheting straps keep bike stable and secure and adjust to fit most bikes - Standard wheel scoop fits up to 2.25" tires. Fat wheel trays are available separately - Adjustable to work with most bikes - Fits 1 1/4- and 2-inch hitches - Can hold two bikes weighing up to 60 lbs each - Rack weighs 20 lbs - Made in the USA
Hollywood's Commuter is a simple, economical hitch rack that's easy to use and keeps your bikes safe. This versatile and handy carrier fits both 1 1/4- and 2-inch receivers and carries up to 2 bikes. Soft rubber protects the finishes, integrated tie-down straps keep the bikes from swaying and Hollywood's No Wobble hitch pin keeps the rack in place. Plus, this smart rack conveniently tilts for easy cargo access, and its arms fold too. - Weight: 16 lbs - Max weight capacity: 35 lbs per bike - Hitch Size: fits both 1 ¼ and 2-inch - Not to be used on any trailer, fifth wheel, or towed vehicle
Take your bikes wherever you roam with Hollywood's Express 2! This trunk rack carries two bikes and fits almost any vehicle, including sedans, mini-vans and SUVs. Four straps solidly attach the Express to the rear of the vehicle, and Hollywood's fast and simple hub adjustment system offers easy installation while allowing this rack to fold flat for easy storage, too. Plus, Hollywood's separators make bike mounting easy and secure and are made of rubber to protect your two-wheeler's paint job. - Spacing between bike cradles: 7-inches - Distance between bike support arms: 15-inches - Four attachment straps - Weight: 10 lbs - Weight Capacity: 90 lbs
The Original is Hollywood's first bike carrier, virtually the same affordable, easy-to-use, indestructible rack they designed back in 1973. Completely user-friendly, and capable of handling up to 3 bicycles, this model's multi-position frame locks into place on its own and its security straps hold fast to fit practically any car, van or SUV. The Original comes completely assembled and folds flat for easy storage, too.
Nothing beats Hollywood's Trail Rider for fast, simple loading/unloading of bikes. It fits almost any style of bike using a padded universal top clamp and adjustable wheel holders. Simply drop the bike into the wheel holders, then slide the self-locking clamp down onto the frame to secure the bike. Plus, this rack folds into a thin profile for garage storage and includes Velcro wheel straps that also fold easily when not in use. - Hitch Size: fits both 1-¼ and 2-inch - Max bike wheel base: 60 inches - Max tire width: 3 inches - Not to be used on any trailer, fifth wheel or towed vehicle - Max weight capacity: 50 lbs per bike - Optional locking hitch pin and cable sold separately
The Sport Rider Trike Adapter fits most recumbent trikes (NOT suitable for adult/industrial style trikes). Track width up to 32" with standard Sport Rider wheel holders, or 36" track width using extra wide Sport Rider wheel holders.
12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
The two-bike EXO DoubleUp attaches directly to the EXO SwingBase, or to the second tier EXO TopShelf, allowing room for an EXO GearLocker or EXO GearWarrior below. Either way, it's super-easy access that accommodates anything you're riding—fat tires to road bikes and everything in between. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Carries 2 bikes up to 50 lbs. each when mounted on EXO SwingBase - Carries 2 bikes up to 40 lbs. each when mounted on EXO TopShelf - Tool-free, locking SpeedKnobs attach and lock EXO DoubleUp to EXO SwingBase or TopShelf - Use SKS Lock cores included with EXO SwingBase or EXO TopShelf for added bike security - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 37.15 lbs. - Dimensions: L 26.60 in x W 72.00 in x H 7.00 in - Limited Lifetime Warranty
Double your hitch capacity with a second tier of super-accessible storage with the EXO TopShelf. Whether you're cycling and camping, skiing and hiking or simply needing to double your load, the EXO TopShelf can mix-and-match EXO accessories to make any adventure easier. - Attaches to EXO SwingBase to create a second level on your EXO Hitch system - Rotates 180 Degrees relative to EXO SwingBase for easy access to gear on lower level or to set-up base camp mode - Accessories install in seconds using the tool-Free EXO Cleat system with locking SpeedKnobs - Included HitchLock locks EXO TopShelf to EXO SwingBase - Includes 2 extra SKS locks cores for use with EXO accessories - Includes a jack stand for base camp mode set-up - Quick and easy install and removal - Limited Lifetime Warranty - Requires EXO SwingBase Product Specs: - Weight: 33.50 lbs. - Dimensions: L 31.00 in x W 25.00 in x H 26.60 in - Limited Lifetime Warranty
We made hauling from home to vehicle to anywhere a snap with the EXO WarriorWheels—wheels and a handle that connect to your EXO GearWarrior, even while it's still on your hitch. Simply snap it together and wheel your gear to wherever you're headed next, whether it's basecamp, the beach or the marina. - Connects to the EXO GearWarrior (or other Warrior baskets) in minutes without tools - All-terrain tires maneuver well over all types of surfaces and handle curbs and roots with ease - Roll up to 110 lbs. of gear to your camp or soccer practice - Large easy to grab handle is positioned to allow for maximum control when going downhill - 2 Year Warranty - Not intended to remain installed during vehicle transport Product Specs: - Weight: 18.50 lbs. - Dimensions: L 64.00 in x W 21.00 in x H 39.00 in - Limited Two Year Warranty
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry six pairs of powder skis—up to 136mm at the tip—or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The OverHang clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security, and the mirror black finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries six pair of skis—up to 136 mm wide at the tip—or four snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - For easier access to skis and snowboards, the OverHang clamp-mounting position shifts the mount further out on your vehicle's roof rack - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 12.75 lbs. - Dimensions: L 40.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
Now the family bikes can ride in style. The FullSwing has all the bells and whistles, from new ZipStrips to fully padded arms. It also swings away with one touch, for easy access to your car whenever you need. Holds up to four bikes. - Swings away from car with bikes loaded to provide easy access to rear of vehicle - Quick and easy assembly - Tool-free installation with locking SpeedKnob - AutoPin automatically positions and secures rack to the hitch and receiver - Zero-hassle ZipStrips quickly secure bike to rack - Fully padded arms for the ultimate in bike protection - Arms fold down when not in use - SKS Locks included; locks racks and bikes - Carries up to 4 bikes - 4 bikes. Total weight, 150 lbs. Maximum bike weight 40 lbs each. - Available: TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. Product Specs: - Weight: 56.00 lbs. - Dimensions: L 43.50 in x W 26.00 in x H 17.50 in - Limited Lifetime Warranty
Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to four mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 4 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Compatible with the sold separately BackSwing - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 65.00 lbs - Dimensions: L 22.00in x W 46.00in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required
Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to six mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 6 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 73.00 lbs - Dimensions: L 22.00in x W 69.50in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
Now you can haul 2 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters thanks to Yakima's HoldUp Hitch Rack. This sturdy rack sports heavy cast wheel trays and their adjustable StrongArm retainers that hold the bikes by the wheels for superior stability and super-quick loading. Side-to-side adjustability ensures a perfect fit and minimizes bike-to-bike interference. A user-friendly trigger folds the tray down for easy access and the entire mast folds up when not in use. Plus, the HoldUp also includes Yakima's LockDown cable system, which secures your bicycles and rack to your vehicle. There's even an integrated bottle opener.
$68.00 - $136.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty
Yakima's Locking Brackets replace two of the regular mounting brackets that come with your MegaWarrior and LoadWarrior luggage carriers so that you can safely secure these baskets to your crossbars. You get two Locking Brackets, Lock Cores and keys.
Page 1 of 5 Next page